Skip to main content
Skip table of contents

RICE NESHAP Engine Assets

RICE NESHAP is an acronym for Reciprocating Internal Combustion Engines National Emissions Standards for Hazardous Air Pollutants. The U.S. Environmental Protection Agency (EPA) adopted national emission standards for hazardous air pollutants (NESHAP) in 2010.  The regulations apply to stationary compression ignition (CI) and spark ignition (SI) reciprocating internal combustion engines (<500hp) at area and major sources of hazardous air pollutants (HAPs). As part of the analysis process alert limits are applied aligned with the EPA guidelines.  Ensure your User Profile’s email preferences are properly defined to receive alert notifications.

Instructions

Registering a RICE NESHAP engine asset:

When registering your engine to apply the RICE NESHAP alert limits, please ensure to complete the designated fields noted below.

Spark Ignited Engines (Natural Gas or Landfill Gas)

  1.  From Assets page, Create an Asset.
  2. Select Asset Class – Engine - Natural Gas or Engine – Landfill Gas.
  3. Complete the asset registrations attribute fields.
  4. For Cycles asset attribute, select either 2 CYCLE - RICE NESHAP-USA ONLY or 4 CYCLE - RICE NESHAP-USA ONLY.

The Cycles asset attribute on the Asset Editor page.

5. Save your asset registration.

When sampling, submit your sample using an Enhanced (blue capped) Mobil Serv sample bottle.

LIMITS - Sample result alert limits for RICE NESHAP spark ignition engines:

Test Parameter

Alert Limit for RICE NESHAP spark ignition engines
Total Acid Number (TAN)Increased by more than 3.0 milligrams potassium hydroxide per gram of typical new oil TAN
ViscosityChange by more than 20 percent of typical new oil viscosity
WaterPercent water content (by volume) is greater than 0.5

 

 Combustion Ignited Engines (Diesel or Gasoline)

  1.  From Assets page, “Create” an Asset
  2. Select Asset Class – “Engine
  3. Complete the asset registrations attribute fields
  4. For “Fuel Type” asset attribute, select either “DIESEL - RICE NESHAP-USA ONLY” or “GASOLINE -RICE NESHAP-USA ONLY

The Fuel Type asset attribute on the Asset Editor page.
5.“Save” your asset registration

When sampling, submit your sample using an Enhanced (blue capped) Mobil Serv sample bottle.

LIMITS - Sample result alert limits for RICE NESHAP combustion ignition engines:

Test Parameter

Alert Limit for RICE NESHAP combustion ignition engines

Total Base Number (TBN)

Diesel Engine

<30 percent of the total base number of the oil when new

Total Acid Number (TAN)

Gasoline Engine

Increased by more than 3.0 milligrams potassium hydroxide per gram of typical new oil TAN

Viscosity

Change by more than 20 percent of typical new oil viscosity
WaterPercent water content (by volume) is greater than 0.5

Corrective Action

According to RICE NESHAP standards, if any of the above limits are exceeded:

  • Oil must be changed in the RICE within 2 business days of receiving the results of the analysis or before operating the RICE, whichever is later.
  • Owner or operator must keep records of the parameters that are analyzed as part of the program, the results of the analysis, and the oil changes for the engine.
  • Oil analysis program must be part of the maintenance plan for the engine.


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.